Resene - enjoy life in total colour
Colours

Resene Total Colour Solvent Pastes

Solvent Pastes (SPs) are a range of pigments dispersed into dispersant/dispersing resin/solvent systems designed for use in a wide variety of solventborne protective coatings. Each system is optimised to the surface demands of each pigment. SPs are volumetrically calibrated.

Systems in which SPs have been successfully used include: epoxy polyamine, polyamide and carboxy systems, polyester urethane, acrylic urethane, moisture cured urethane, aspartic ester urethanes, long medium and short oil alkyds, oxazolidone urethane, NC lacquers, acid catalysed alkyds, solventborne acrylics and vinyls, chlorinated rubber and chlorinated polyolefins.

Although designed for incorporation on standard paint shakers, the greater the shear that can be applied at the time of incorporation, the more uniform the colour with less chance of flooding or flocculation. Some high solids systems will definitely require greater shear than can be exerted by a paint shaker.

While SPs have been designed to achieve the broadest degree of compatibility, idiosyncrasies within any formulation can effect compatibility. We have long experience in recognising the causes of such problems and are able to help formulate around any issues that may arise.

The dispersing resins used are durable and inert, and generally will not detract from the paint properties. However, at use levels of greater than 10% by volume or in critical systems, solvent / chemical resistance testing would be appropriate.

Colour formulation data bases established with SPs can also be utilised with other Resene Total Colour Pastes.

    Mass Tone 1:1 TiO2 1:5 TiO2 1:20 TiO2  
             
Tinter UP A   Mass Tone 1:1 1:5 1:20  
Tinter SP A   Mass Tone 1:1 1:5 1:20  
Tinter B   Mass Tone 1:1 1:5 1:20  
Tinter C   Mass Tone 1:1 1:5 1:20  
Tinter D   Mass Tone 1:1 1:5 1:20  
Tinter E   Mass Tone 1:1 1:5 1:20  
Tinter F   Mass Tone 1:1 1:5 1:20  
Tinter G   Mass Tone 1:1 1:5 1:20  
Tinter H   Mass Tone 1:1 1:5 1:20  
Tinter J   Mass Tone 1:1 1:5 1:20  
Tinter K   Mass Tone 1:1 1:5 1:20  
Tinter L   Mass Tone 1:1 1:5 1:20  
Tinter M   Mass Tone 1:1 1:5 1:20  
Tinter P   Mass Tone 1:1 1:5 1:20  
             
 
      Resistance to bleed in Light Fastness
  Pigment Density
gm/cc
Total Solids % Pigment Solids % Alkali Acids Butyl Acetate Xylene Mass Tone Tint 1:25
Tinter UP A 97 1.20 48 40 5 5 2-3 4 7-8 7
Tinter SP A 120 1.18 68 45 5 5 4-5 4-5 8 7
Tinter UP B 7 1.22 38 28 5 5 5 5 8 8
Tinter SP B 7 1.14 58 24 5 5 5 5 8 8
Tinter UP C 42 1.89 64 58 5 5 5 5 8 8
Tinter SP C 42 1.86 73 62 5 5 5 5 8 8
Tinter UP D 7 1.33 52 45 5 5 5 5 8 8
Tinter SP D 7 1.10 49 25 5 5 5 5 8 8
Tinter UP E 15.3 1.15 39 21 5 5 5 5 8 7
Tinter SP E 15.3 1.12 50 27 5 5 5 5 8 7
Tinter UP F Red 101 2.34 73 70 5 5 5 5 8 8
Tinter SP F Red 101 2.21 81 67 5 5 5 5 8 8
Tinter UP G 73 1.14 50 40 5 5 2-3 4-5 8 8
Tinter SP G 73 1.04 51 42 5 5 2-3 4-5 8 8
Tinter UP H Red 254 1.36 51 45 5 5 5 4-5 8 8
Tinter SP H Red 254 1.19 64 45 5 5 5 4-5 8 8
Tinter UP J 23 1.13 23 19 5 5 5 4-5 8 7
Tinter SP J 23 1.04 35 19 5 5 5 4-5 8 7
Tinter UP K 17 2.45 77 70 5 5 5 5 8 8
Tinter SP K 17 2.26 81 70 5 5 5 5 8 8
Tinter UP L Blend 1.69 65 9 5 5 5 5 8 8
Tinter SP L Blend 1.23 66 23 5 5 5 5 8 8
Tinter UP M Red 122 1.11 36 30 5 5 5 5 7-8 7
Tinter SP M Red 122 1.00 30 15 5 5 5 5 7-8 7
Tinter UP P Yellow 184 2.04 64 60 5 4-5 5 5 8 8
Tinter SP P Yellow 184 2.06 77 59 5 4-5 5 5 8 8