Stilts

Difficulty level: Moderate

You will need: Tape measure, 50mm x 50mm timber cut to two 1.8m lengths, 50mm x 100mm timber cut into two 140mm pieces, 100mm nails, Hammer, Paintbrush, Paint stirrer, Pencil, Resene Quick Dry, Resene Lustacryl tinted to Resene California, PVA glue, Sandpaper, Saw

To get the look: Mark stained the background deck with Resene Kwila Timber Stain.

Other ideas: These timber stilts could also be stained with any colour from the Resene Woodsman penetrating oil stain range.

Other projects you might like to try