Close Give Feedback
Resene Paints - home page
Facebook Pinterest Instagram YouTube

Raised bed with seat

Mark Rayner shows you how to build this stylish raised bed from landscaping timber, complete with a built-in seat - perfect for some relaxing, easy-access gardening.

You will need: 200mm x 50mm H4 tongue and groove landscaping timber cut to the following lengths: Four x 1.2m, six x 2m, 100mm x 100mm x 2.4m H4 fence post cut into six 400mm lengths, 100mm galvanised jolt head nails, twelve M8 x 100mm galvanised coach screws*, twelve M8 galvanised washers*, Resene Woodsman Penetrating Oil Stain tinted to Resene Grey Green, paintbrush, tape measure, pencil, saw, coarse sandpaper, hammer , drill and drill bits, two large clamps, socket set or adjustable spanner, paint stirrer, set square, spirit level, garden fork or spade, good quality topsoil or potting mix.

* Mark used coach screws and washers to attach the front of the raised bed as part of the design look, but you could use 100mm nails instead, which would be a cheaper option.

For a different look: To create a darker look, use Resene Woodsman Penetrating Oil Stain tinted to Resene Pitch Black.

Another idea: Use your raised bed to grow a selection of herbs and salad crops or plant up with fragrant and tactile plants to create a sensory raised garden.

As seen in kiwigardener

Step 1 how to build a raised garden bed

Step 1
Measure and mark the landscaping timber and fence post to the lengths as listed.

Step 2 how to build a raised garden bed

Step 2
Cut the timber and smooth any rough edges with coarse sandpaper.

Step 3 how to build a raised garden bed

Step 3
To create one side wall of the raised bed, attach two of the lengths of fence post to two of the 1.2m lengths of landscaping timber, as shown, fixing with 100mm nails. Ensure top edges are flush.

Step 4 how to build a raised garden bed

Step 4
Repeat step 3 with two other lengths of fence post and the remaining 1.2m lengths of landscaping timber.

Step 5 how to build a raised garden bed

Step 5
Turn the two sides upside down and upright on a flat surface and place one of the 2m lengths of timber at 90 degrees to them, ensuring edges are flush. Drill two pilot holes at each end to fit the coach screws. Place a second 2m length of timber on top of this and drill two more pilot holes at each end.

Step 6 how to build a raised garden bed

Step 6
Turning the sides and front of the raised bed the right way up, place in position, holding the front in place with a large clamp at either end.

Step 7 how to build a raised garden bed

Step 7
Fix a coach screw and washer into each of the pre-drilled pilot holes along the front of the raised bed. In the same way, attach another length of fence post, centrally along the front. Again, ensure the top edge is flush.

Step 8 how to build a raised garden bed

Step 8
Fix the back into position, as shown, using 100mm nails. Again, use clamps to hold the lengths of timber in position. Use a set square to ensure the walls of the raised bed are at right angles and use a spirit level to make sure they are level.

Step 9 how to build a raised garden bed

Step 9
Attach the remaining 2m lengths of timber along the front and back edge of the raised bed, fixing through the top, into the fence post supports, with 100mm nails.

Step 10 how to build a raised garden bed

Step 10
Carefully stir the Resene Woodsman with a paint stirrer.

Step 11 how to build a raised garden bed

Step 11
Apply two coats of Resene Woodsman to the raised bed, allowing 24 hours for each coat to dry (48 hours in cold weather).

Step 12 how to build a raised garden bed

Step 12
Fill the raised bed with good quality topsoil or potting mix and plant up with drought- tolerant plants for a low-maintenance bed, or potted colour and bulbs for a changing seasonal display.

View more projects

 

Order online now:
Testpots | Paints | Primers and Sealers | Stains | Clears | Accessories

Get inspired Get inspired ! Subscribe      Get saving Get saving ! Apply for a DIY card

Resene Paints Ltd

Can't find what you're looking for? Ask us!

Resene Paints (Australia) Limited   – www.resene.com

Follow us on Facebook Follow us on Pinterest Follow us on Instagram Follow us on YouTube
Videos on how to paint and stain your house
 

Welcome to our World of Colour!™
Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.

What's new | Specifiers | Painters | DIYers | Artists | Kids | Sitemap | Home | TOP ⇧