Close Give Feedback
Resene Paints - home page
Follow us on Facebook Follow us on Pinterest Follow us on Instagram Follow us on YouTube

Fancy fencing

Mark Rayner breathes new life into old trellis with a thorough clean and a simple paint job.

To get the look: Mark painted the shed wall with Resene Lumbersider tinted to Resene Soft Apple, or for a warm green effect paint with Resene Clover.

You will need: Resene Moss and Mould Killer, garden sprayer, old trellis, Resene Paint Prep and House Wash, bucket, stiff bristled brush, hose or access to clean running water, sandpaper, drill with 4mm drill bit, 100 mm galvanised timber screws with washers, ratchet or small spanner for fixing screws and paintbrushes, Resene Turps, Resene Rust-Arrest, Resene Quick Dry and Resene Lumbersider tinted to Resene Alabaster.

As seen in kiwigardener

Step 1 how to refurbish your tired trellis

Step 1
Mix one part Resene Moss & Mould Killer to five parts clean water and fill the garden sprayer with the diluted solution.

Step 2 how to refurbish your tired trellis

Step 2
Generously soak the wooden trellis with the solution and leave for 48 hours.

Step 3 how to refurbish your tired trellis

Step 3
Mix one part Resene Paint Prep and Housewash to three parts water or use the ready to use product.

Step 4 how to refurbish your tired trellis

Step 4
Scrub the solution vigorously into the trellis using a stiff-bristled brush.

Step 1 how to refurbish your tired trellis

Step 5
Allow the trellis to remain wet for 10 to 15 minutes and then rinse thoroughly with clean water. Allow to dry.

Step 1 how to refurbish your tired trellis

Step 6
If necessary, sand any areas of rust and spot prime any metal nail heads with Resene Rust-Arrest. Allow to dry for 24 hours.

Step 1 how to refurbish your tired trellis

Step 7
Spot prime any areas of bare wood with one coat of Resene Quick Dry and allow two hours to dry.

Step 1 how to refurbish your tired trellis

Step 8
Apply two coats of Resene Alabaster to the trellis, allowing two hours for each coat to dry.

Step 1 how to refurbish your tired trellis

Step 9
Place the trellis in position and drill several pilot holes, as shown, along the edge and base of the trellis.

Step 1 how to refurbish your tired trellis

Step 10
Fix the trellis in place with 100mm galvanised screws and washers, as shown.

Step 1 how to refurbish your tired trellis

Step 11
Paint the screw heads with two coats of Resene Alabaster, allowing two hours for each coat to dry.

View more projects

 
 

Order online now:
Testpots | Paints | Primers and Sealers | Stains | Clears | Accessories

Get inspired Get inspired ! Subscribe      Get saving Get saving ! Apply for a DIY card

Resene Paints Ltd

Can't find what you're looking for? Ask us!

Resene Paints (Australia) Limited   – www.resene.com

Follow us on Facebook Follow us on Pinterest Follow us on Instagram Follow us on YouTube
Videos on how to paint and stain your house
 

Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.

What's new | Specifiers | Painters | DIYers | Artists | Kids | Sitemap | Home | TOP ⇧