Feedback

Garden trellis


From NZ Gardener magazine

Mark the entrance to your special spot in the garden with Rose Hughes’ latest project.

Garden entryway made from trellis

Materials:

  • 4m 75mm x 50mm treated pine
  • 1 x 600mm x 1800mm diamond trellis
  • 6m Quad 12mm pine beading
  • 8g x 80mm screws / 25mm panel pins
  • Drop saw
  • Skilsaw
  • Chisel and wood rasp
  • Screwdriver / drill bits / countersink bit

Cost: $220 excluding paint.

Step 1 Step one
Cut the pine into 4 x 2000mm lengths. Mark 300mm up from the base and 375mm down from the top. Measure and mark 25mm in from the long edge and use an offcut of the timber to mark the outline of the cutout. Mark the same outline at the top of each post. Cut 6 x 350mm lengths.
Step 2Step two
Clamp one pair of posts together. Set the Skilsaw blade to 25mm depth and create multiple cuts within the marks. Use the chisel to remove the slices and tidy the cut area. Drill, countersink, glue and screw the lower two joiners into position in the gully cuts. Repeat so you have two complete sides.
Step 3Step three
Cut the trellis to fit the central space on each side. Cut beading to fit using 45-degree angles at the corners, attach to one face using glue and panel pins. Punch the nails through the surface of the beading. Insert the trellis and repeat to encapsulate the trellis.
Step 4 Step four
Cut 1 x 900mm length and centre this on the remaining two 350mm pieces. Drill, countersink and screw together. Cut 2 x 1300mm lengths
Step 5Step five
Fill all holes, allow to dry and sand well. Undercoat with Resene Quick Dry Primer. When dry, top coat (x2). I used Resene Lumbersider in White.
Step 6Step six
Insert the top brace into the top gully cuts and screw into position through the front of the posts using one screw. Centre the 1300mm length over the front and back, and attach with two screws 6 ensuring these are either side of the brace screw. Fill the holes, allow to dry and top coat.
 

Resene Paints Ltd

Resene Paints Ltd   – www.resene.com

We would love to hear from you if you wish to use Resene's images, information and ideas for social medial, blogs, newsletters and other media use. Please email update@resene.co.nz and let us know what you need, what it is for and how Resene will be acknowledged as the source of the content. We are happy to assist with most requests.

Our vision is to be respected as a trusted, ethical and sustainable company and acknowledged as the leading provider of innovative paint and colour technology. View Resene’s profile, Quality Policy, Environmental Policy and Health & Safety Policy.

Any personal data, such as name, address, phone, email details, supplied to Resene for the purposes of receiving newsletters, orders etc will be retained by Resene Paints Ltd and used only by Resene Paints Ltd and its trusted agencies for the purposes of communication/promotion/providing service to you. We do not sell, trade or otherwise transfer your personal data to outside third parties. If you wish to opt out of communication from Resene please complete our contact us form. View our full Privacy Policy.

Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.

View Videos