Resene ProSelect Naturadd

Developed specifically for professional flooring contractors, Resene ProSelect Naturadd is a matting concentrate to reduce sheen and/or provide a more natural timber appearance.

Typical uses

• To reduce gloss level in Resene ProSelect Base to offer the following finishes;
  • Low Sheen
  • Natural Low Sheen
  • Ultra Matt finish

Mixing

For use by experienced professional applicators only.

IMPORTANT NOTE/S:

Ensure Resene ProSelect Naturadd is added and mixed thoroughly into the Base BEFORE the addition of Cure.

During application of the finished product DO NOT overwork and DO NOT spread too thin.

Mechanical stir. Do not shake.

Select desired finish and then mix appropriate components and additives according to the Resene ProSelect Mixing Chart.

Dose Rate: Up to 20% by volume per L of Base. Refer to the Resene ProSelect Mixing Chart.

Precautions

Consult the Safety Data Sheet and can labels for this product prior to use. Users should ensure that they are familiar with all aspects concerning safe use of the product. IF IN DOUBT DO NOT USE THIS PRODUCT.

Storage/Transport

Do not allow to freeze. Temperature during transport and or storage is required to be >5°C and <25°C.

Downloads

• Safety Data Sheet
• Technical Product Data Sheet
• Labels

Refer to www.resene.com/proselect or the Resene ProSelect Technical Data Booklet for more detailed information.

Disclaimer
This is not a specification and all of the information is given in good faith. Since conditions of use are beyond the control of the manufacturer, information herein is without warranty, implied or otherwise, and final determination of the suitability of any information or material for the use contemplated, the manner of use is the sole responsibility of the user. The manufacturer does not assume any liability in connection with the use of the product relative to coverage, performance or injury.

15 August 2017