Developed specifically for professional flooring contractors, Resene ProSelect Colour Concentrates use durable coloured pigments (not dyes) and are designed to be added to the Resene ProSelect Stain Base. Combinations of different colour concentrates allows a vast colour range to be achieved putting the control back into the flooring professional’s hands.
Physical properties |
|
---|---|
Material type: | Durable pigment concentrate with binder |
Solvent: | Water |
Dose Rate: | Up to 20% (by volume) into ProSelect Stain Base |
Colours: | Black / White / Dark Brown / Red Brown / Yellow Brown |
Cleanup: | Water or Soapy water |
VOC (g/L) | |
---|---|
Dark Brown | 29 |
Red Brown | 46 |
Yellow Brown | 54 |
Black | 52 |
White | 42 |
Resene ProSelect Colour Concentrate samples mixed, diluted and applied to Bleached Australian Oak (Oak (aka Victorian Ash/Tasmanian Oak)
For use by experienced professional applicators only. Shake well before use. Add Resene ProSelect Colour Concentrate to achieve desired colour and strength. Shake or stir well until colour is even. Best used within 48 hours after adding colour concentrate to the ProSelect Stain Base.
Dose Rate: Typically 10% (by volume) is suitable for most timbers. Up to 20% (by volume) can be added to achieve a stronger colour effect.
Consult the Safety Data Sheet and can labels for this product prior to use. Users should ensure that they are familiar with all aspects concerning safe use of the product. IF IN DOUBT DO NOT USE THIS PRODUCT.
Do not allow to freeze. Temperature during transport and or storage is required to be >5°C and <25°C.
Refer to www.resene.com/proselect or the Resene ProSelect Technical Data Booklet for more detailed information.
Disclaimer
This is not a specification and all of the information is given in good faith. Since conditions of use are beyond the control of the
manufacturer, information herein is without warranty, implied or otherwise, and final determination of the suitability of any
information or material for the use contemplated, the manner of use is the sole responsibility of the user. The manufacturer
does not assume any liability in connection with the use of the product relative to coverage, performance or injury.
30 August 2017
Order online now:
Testpots |
Paints |
Primers and Sealers |
Stains |
Clears |
Accessories
Get inspired ! Subscribe Get saving ! Apply for a DIY card
Can't find what you're looking for? Ask us!
Company profile | Terms | Privacy policy | Quality and environmental policy | Health and safety policy
Welcome to our World of Colour!™
Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online. See measurements/conversions for more details on how electronic colour values are achieved.
What's new | Specifiers | Painters | DIYers | Artists | Kids | Sitemap | Home | TOP ⇧