Close Give Feedback
Resene Paints - home page
Follow us on Facebook Follow us on Pinterest Follow us on Instagram Follow us on YouTube

Metal mirror

Use Resene metallic paint and ordinary washers to create a cool contemporary framed mirror.

Resene art with Mark Rayner - Project 15

Difficulty level: Moderate

You will need: 28 x 30mm round stainless steel or galvanised washers, 300mm x 300mm mirror tile, 4 x 50mm square stainless steel or galvanised washers, artists’ brushes, paint tray/roller, pencil, piece of 17mm plywood measuring 400mm x 400mm, PVA glue, Resene Enamacryl Metallic (now Resene FX Metallic) tinted to Resene Scotty Silver, Resene Galvo One primer, Resene Lumbersider tinted to Resene Heather, Resene Quick Dry waterborne primer undercoat, Resene Sandtex, Resene Multishield+ (now Resene Concrete Clear) gloss, ruler.

To get the look: Mark painted the surrounding wall with Resene SpaceCote Low Sheen tinted to Resene Bismark.

Other ideas: Go over the top and try a sumptuous gold effect using Resene Enamacryl Metallic (now Resene FX Metallic) tinted to Resene Bullion.

Step 1
Step one
Rule a pencil line 50mm in from each edge of the plywood board and glue a square washer into each corner with PVA glue. Glue the remaining round washers into position, ensuring that they are evenly spaced, as shown.
Step 2
Step two
Using an artists’ brush, paint each washer with one coat of Resene Galvo One primer. Allow to dry.
Step 3
Step three
Using an artists’ brush, apply one coat of Resene Quick Dry waterborne primer undercoat to the surrounding plywood and edges of the board. Allow to dry for one hour.
Step 4
Step four
Using a large artists’ brush and stippling technique, apply one coat of Resene Sandtex, as shown. Allow to dry for 2 hours.
Step 5
Step five
Apply one coat of Resene Heather over the textured edge, as shown. Allow to dry for 2 hours.
Step 6
Step six
Using a small roller, apply two coats of Resene Scotty Silver, allowing two hours drying time after each coat.
Step 7
Step seven
Using a large artists’ brush apply three coats of Resene Multishield+ (now Resene Concrete Clear) gloss, allowing two hours drying time after each coat.
Step 8
Step eight
Glue the mirror into position with PVA and let the glue dry before hanging.

Other projects you might like to try

How to make a dressing table
Dressing table

Resene art
How to brighten up an old wooden garden gate
Garden gate

Weekend DIY
How to make a white wooden box
White wooden box

Ways with wood
How to make green seed drawers
Green seed drawers

Weekend gardener

View more projects

 

Order online now:
Testpots | Paints | Primers and Sealers | Stains | Clears | Accessories

Get inspired Get inspired ! Subscribe      Get saving Get saving ! Apply for a DIY card

Resene Paints Ltd

Can't find what you're looking for? Ask us!

Resene Paints (Australia) Limited   – www.resene.com

Follow us on Facebook Follow us on Pinterest Follow us on Instagram Follow us on YouTube
Videos on how to paint and stain your house
 

Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.

What's new | Specifiers | Painters | DIYers | Artists | Kids | Sitemap | Home | TOP ⇧