Close Give Feedback
Resene Paints - home page
Follow us on Facebook Follow us on Pinterest Follow us on Instagram Follow us on YouTube

Bright new start


Project ideas and inspiration from Good magazine

Lighten and brighten a dull, old wooden floor with a sleek coat of whitewash.

Polished wooden floorboards are practical and fantastic looking, but sometimes a room needs a lighter effect than the typical deep orange or brown of polyurethaned wood. The whitewash paint effect used here adds lightness and a touch of colour without giving your floors a flat, white, overly sterile look of a solid colour. Whitewash is also a great way to add a touch of sophisticated Scandinavian style.

Bathroom before whitewash effect
Before

Bathroom with whitewashed floor
After

Resene Colorwood Whitewash is easy to apply – it’s somewhere between paint and polyurethane to use. The whitewash is slightly translucent and the effect becomes a little more so as it dries, so it doesn’t completely cover your floor’s lovely wood grain. You can add extra layers to gain the degree of coverage you want, or you can get Resene Colorwood tinted to a range of stain colours.

Resene Colorwood Whitewash is Environmental Choice approved and low in odour and in VOC compared with more conventional solvent-based interior stains and polyurethanes.

You will need

Step-by-step instructions

  1. Remove any large fixtures (if possible). Wearing a dust mask, sand the floor to achieve a smooth surface and to completely remove any old polyurethane residue.

Bathroom before whitewashed floor

Painting supplies

Painting supplies 2

  1. Check the floor surface for any nail holes or other spots that need filling with builder’s bog. Fill, allow to dry and sand smooth. Bear in mind any patches may be visible through the whitewash so you may want to colour it accordingly. Clean the entire room so it’s free of any dust.

  2. You can spray Resene Colorwood Whitewash onto the floor or apply it with a large brush. To brush it on evenly, pour a little Whitewash onto an area and spread it out using long smooth strokes following the direction of the floorboards and the wood grain. You can recoat the Whitewash if you wish after several hours (walking on the surface in clean socks), but you will need to allow 72 hours for the final painted surface to cure fully.

  3. Topcoat your wooden floor with Resene Qristal ClearFloor. This is a waterborne urethane durable flooring finish that will help protect the wood and keep your floor looking fabulous for longer. Allow seven days for this coat to reach its full cure.

Words and styling Sarah Heeringa. Photography, before image, Amanda Reelick, after image, Jessie Casson. 2016

Download this article as a PDF


Good magazine projects
Wanting to tackle a project at your place but only have a weekend to spare? Get inspired with these projects from Good magazine. Reclaim and upcycle with paint.

View Good projects | View all projects

 

Order online now:
Testpots | Paints | Primers and Sealers | Stains | Clears | Accessories

Get inspired Get inspired ! Subscribe      Get saving Get saving ! Apply for a DIY card

Resene Paints Ltd

Can't find what you're looking for? Ask us!

Resene Paints (Australia) Limited   – www.resene.com

Follow us on Facebook Follow us on Pinterest Follow us on Instagram Follow us on YouTube
Videos on how to paint and stain your house
 

Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.

What's new | Specifiers | Painters | DIYers | Artists | Kids | Sitemap | Home | TOP ⇧