Close Give Feedback
Resene Paints - home page
Follow us on Facebook Follow us on Pinterest Follow us on Instagram Follow us on YouTube

Supplies for a compost heap
Supplies for building a compost heap

You'll need:

How to build a compost heap:

Step 1Step 1

Step 2Step 2

Step 3Step 3

Step 1:  Decide on the type of composting system that will best meet your needs. In this large garden, we opted for a triple-stage bin. It can take three to four months for composting to take place. In that time, the heat at the centre of the pile will approach 60?C, and everything in the bin needs to go through that cooking process to kill any weeds and avoid putrefaction. One bin will be filled with clippings, which will be turned regularly for even aeration and heat distribution. Over the composting period, the other bins will be progressively filled and turned, so there is always a good rotation of material in and out of the system.

Then, using a string line and pegs, map out the dimensions of your composting system. Dig holes for the support posts and bed them in. It helps if the corner posts are the same height as the steel mesh you plan to use.

Step 2:  Measure out the framing, cut to length and nail onto the vertical supports top and bottom for stability. We also used a length of half-round on the outside edges of the framing for looks, and half-way down the exterior edges for added strength, once the mesh had been added.

Step 3:  Secure the leading edge of the wire mesh to one of the front outside supports. Encase each bin in mesh on the sides and back, stapling the wire to the corner posts and framing as you go. The wire will let air into the bins, while still keeping the compost contained.

Step 4Step 4

Step 5Step 5

Step 6Step 6

Step 4:  Measure and cut half rounds. You'll need one length for each vertical face of the bin fronts, and enough to close in the fronts of the bins horizontally from ground level to the top. These will easily lift out to allow for the turning and removal of compost.

Step 5:  Nail one length of half round to each front vertical side of the bins, with a few centimetres overhang on the inside edge. Cut a length of trellis beading to the same height. Measure back from the half round to slightly more than the cross section width of a piece of half round and nail the beading to the vertical support.

Step 6:  Drop each of the half rounds into the slots between the facing half rounds and the beading. This closes the front of the bins.

words and pictures: Rachel Macdonald


Search habitat magazine stories

Want to get your own free copy of future issues of habitat magazine?

Printed copies of habitat highlights are available from late March 2024 at Resene ColorShops and resellers, while stocks last. You can view back issues of habitat magazine online.

If you have an idea, project or story that you think would suit habitat, we’d love to hear from you. Please drop us an email with your details and include photos if submitting a project.

Sign up for a DIY card and Save! Australia | New Zealand

Return to Habitat 07

 

Order online now:
Testpots | Paints | Primers and Sealers | Stains | Clears | Accessories

Get inspired Get inspired ! Subscribe      Get saving Get saving ! Apply for a DIY card

Resene Paints Ltd

Can't find what you're looking for? Ask us!

Resene Paints (Australia) Limited   – www.resene.com

Follow us on Facebook Follow us on Pinterest Follow us on Instagram Follow us on YouTube
Videos on how to paint and stain your house
 

Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.

What's new | Specifiers | Painters | DIYers | Artists | Kids | Sitemap | Home | TOP ⇧