Salt can be a real problem in areas not naturally washed by rain and rinsing of these areas with copious quantities of water is the best method of removing salt. Often waterblasters leave much of the salt behind or force it up behind weatherboards or into other crevices to cause problems later on. Old chalky paint and bare timber in coastal areas can harbour salt deposits and accumulate them over the years. Salt needs to be washed away or it will stain through waterborne paints and may also attack nails. Once salt has been painted over it cannot be removed and stains can only be blocked off by a coat of a solventborne paint.
Most New Zealand cities are in areas rated severe or very severe corrosion zones. This means that contamination of buildings by salt spray from the sea is highly likely. Salt may accumulate in areas not washed by rain. Salt can also be left behind as a by-product of killing mould using sodium hypochlorite type bleaches.
Salt will bleed through waterborne paints and cause staining. Fresh salt deposits may be left by strong off sea winds requiring daily attention. Stains can be sealed off using Resene Sureseal.
Prevent salt problems by thorough surface preparation including washing with copious quantities of freshwater.
Can't find what you're looking for? Ask us!
We would love to hear from you if you wish to use Resene's images, information and ideas for social medial, blogs, newsletters and other media use. Please email email@example.com and let us know what you need, what it is for and how Resene will be acknowledged as the source of the content. We are happy to assist with most requests.
Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online. See measurements/conversions for more details on how electronic colour values are achieved.