Close Give Feedback
Resene Paints - home page
Follow us on Facebook Follow us on Pinterest Follow us on Instagram Follow us on YouTube

See the light

From the Resene colour choices booklet

From natural to artificial, from bulb to fluorescent, how do different kinds of light affect the way we perceive colour?

How light affects colour

Wall in Resene Coast with circle headboard in Resene Seachange and side table/stool in Resene Twizel.

Have you ever wondered why your stunning new chocolate brown jumper suddenly adopts an off-putting muddy hue when you try it on in front of your bedroom mirror? Or why the red wall in your lounge looks burnt orange at night?

And why your Resene ColorShop staff will advise you to paint your testpot of colour onto a piece of card or firm paper and move it about the room you intend to paint so that you can see it under different lights? Also, to view your sample at night under artificial light as well as during the day?

To understand the intricacies of colour, the first thing to remember is that we can only see different shades if they are illuminated. In order for them to be anything other than degrees of black and white, light has to hit the surface and be reflected back.

The brightness of that light is measured in units called lumens – the more lumens, the brighter the light. One lumen is equivalent to one lux, which is the brightness of four full moons. Humans need a quarter of a lux to be able to see at all.

In the daytime, under the bright light of the sun, we see the world around us reflected in combinations of the three primary colours of light: red, green and blue. All shades are created from these three hues. When equal amounts of red, blue and green are reflected, the brain perceives the result as white; when they are absent, we get black.

While red, yellow and blue are the primary colours for items like paint, the primary colours of light include red and blue but replace yellow with green.

Natural versus artificial

In an ideal scenario, 'true colour' is the shade closest to that reflected directly by the sun, which contains the full spectrum of the rainbow. We can achieve this by using as much natural light as possible in our living, working and commercial spaces.

There are numerous artificial light sources available to us today, with many more in the process of being developed. These are used to compensate for lack of natural light or to achieve deliberate colour effects. As a general rule of thumb, warm light (pink, red, yellow…) accentuates warm colours, while cold light (blues, greens, white, grey…) enhances colder tones.

Glow in the dark paint
Wall in Resene Blue Bark, moons in Resene FX Nightlight glow-in-the-dark paint with various colours brushed on top.

The FACE rules

It's easy to identify what you need the light to achieve, by following the FACE rules. They are:

stands for function. What do you want to achieve with the light? Do you want to bring out the best in the colours of your interiors and sofa cushions? Do you want to light up an entire sports field? Does the light have to be practical, for example, in a study?

for ambience. This is particularly important in hotels or restaurants, where you want to create a certain atmosphere to draw in customers; or in retail, to make merchandise look appealing and expensive. Or, perhaps you want to create a relaxed mood in a casual living area. Cool, blue light will enhance an indoor pool, while warm pinks will set the scene in your meditation room.

C  for comfort. Do you see a glare? Does the light feel too hot?

E  for economy. In other words, what is the most affordable lighting solution for your needs?

Artificial light sources

Incandescent light, which Thomas Edison invented around 1879, is where an electrical current heats a thin filament in the bulb, and so produces light. Halogen lights are a type of incandescent but have a more directed light so are better for task lighting.

Pros:  Incandescent light bulbs have perfect colour rendering, are cheap to produce and work well on alternating or directing a current. They are commonly used in households, commercial setups, portable lighting, for decorative purposes and in advertising lighting.

Cons:  Incandescent lighting is hideously expensive as a lot of power is required to produce the energy – one light bulb only lasts roughly 1000 hours. The heat it generates makes them too hot to touch and so they are dangerous in certain situations.

Incandescent light bulbs are gradually being replaced in many applications by sources that produce more light but use less electricity, such as fluorescent lighting.

Fluorescent lighting uses electricity generated through gas discharge – in a nutshell, a tiny amount of mercury in a phosphor-lined glass tube emits ultraviolet (U.V.) light. The phosphor absorbs the U.V. light and re-emits it as light the human eye can see.

Pros:  Compact fluorescent lamps are super energy efficient – they produce a quarter of the heat per lumen of an incandescent light bulb and last about six times longer (about 6000 hours).

Cons:  To the conventional eye, fluorescents sometimes seem too bright and appear to make colours look unnatural and garish. To combat this, opt for the yellow-tubed fluorescents (such as 'warm white') instead of pure white ones, or an extremely low wattage lamp. Also, fluorescent light cannot be used in dimmers.

Light-emitting diodes (LED). This is expected to be the most practical light source in the years to come. Generated by a semi-conductor, it's the light you see in flashlights and cell phones.

Pros:  LEDs are five times as power-efficient as fluorescent lighting but there is a catch – at present, the microchip inside the LED light only emits light in one direction. It doesn't reflect it back, which means it doesn't allow us to see colour. The solution is to design lenses that go on top of the LED and disperse the light.

When light tricks our sight

Most of us will have experienced the navy sock/black sock scenario. You take a pair of apparently black socks out of the drawer, then realise later that one of them is actually blue. Don't worry, it doesn't mean you're colour blind – it's a common phenomenon called sample metamerism.

The reason for the optical illusion is that the wavelength emission between various light sources, such as incandescent and fluorescent light, differs. Incandescent light bulbs emit very few short blue wavelengths, which makes it hard to tell whether a colour we see in such light is dark blue or black. Fluorescent light, on the other hand, emits more shortwavelength light, and so it's easier to distinguish the two colours.

On the flipside, you can also have two identical colour samples that look vastly different when viewed under different lights. This phenomenon, called illuminant metamerism, explains how retailers (or homeowners) can use light to present their product (or your interiors) in the most flattering light.

There are various other 'metamerisms'. One is observer metamerism – the fact that individuals perceive colour slightly differently. Another is geometric metamerism – the different appearance of colours when seen from different angles, distances and light positions. Did you know that one reason men and women often see colour differently is that the distance between a woman's eyes is usually slightly less than a man's?

Metamerism also affects the way we view paint colour charts, which is why Resene uses actual Resene Environmental Choice approved paint on many of its colour charts, such as The Range fandeck series. The next time you have a colour chart and a testpot that you think don't match, try wandering outdoors – you'll often find they are a perfect match and it is just the interior lighting that is making them appear different.

Wherever possible, it is best to develop a lighting plan at the same time as your paint scheme. For example, if you decide to paint any of the rooms in a dark colour, you are likely to need more lighting than if your walls were pale and would therefore reflect the light.

Download a PDF of this article

Resene colour choices booklet
Choose colour with confidence and creativity


Order online now:
Testpots | Paints | Primers and Sealers | Stains | Clears | Accessories

Get inspired Get inspired ! Subscribe      Get saving Get saving ! Apply for a DIY card

Resene Paints Ltd

Can't find what you're looking for? Ask us!

Resene Paints (Australia) Limited   –

Follow us on Facebook Follow us on Pinterest Follow us on Instagram Follow us on YouTube
Videos on how to paint and stain your house

Welcome to our World of Colour!™
Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.

What's new | Specifiers | Painters | DIYers | Artists | Kids | Sitemap | Home | TOP ⇧