Subscribe | Help | Stores | Order | Promos

Entire Resene Site Colour Q & A only Technical Q & A only Products section only Data sheets section only Safety data sheets only Resene ColorShop online

DIY project categories...

Videos: DIY how to | MasterSpec DIY tutorials | habitat videos | Colour class

Terracotta paving

Transform an old painted path or patio into a rich terracotta coloured walkway using Resene Non-Skid Deck & Path paint.

Create a terracota coloured path or patio

Weekend DIY with Mark Rayner - Project 35

Difficulty level: Moderate

You will need:, Broom, Bucket, Clean water, Garden sprayer, Masking tape, Paintbrush, Paint tray and roller, Resene Concrete Primer, Resene Moss & Mould Killer, Resene Non-Skid Deck & Path paint tinted to Resene Pompeii and Resene Scorched Clay , Resene Paint Prep and Housewash, Stiff-bristled brush, Water blaster

To get the look: Mark painted the pot with Resene Lumbersider tinted to Resene Barely There.

How to paint a terracotta walkway

Step 1

Step one
Sweep the previously painted concrete clean of any dirt or debris. Mix one part Resene Moss & Mould Killer to five parts clean water and apply generously using a garden sprayer. Leave for 48 hours.

Step 2

Step two
Mix one part Resene Paint Prep and Housewash to three parts clean water and vigorously scrub the concrete with a stiff-bristled brush.

Step 3

Step three
Waterblast the entire area to wash away soap residue – this will also help to remove any areas of loose paint. Allow to dry.

Step 4

Step four
Spot prime any areas of bare concrete with Resene Concrete Primer and allow two hours to dry.

Step 5

Step five
Apply two coats of Resene Scorched Clay to the concrete using a paint roller, cutting in, where necessary, with a paintbrush. Allow three hours for each coat to dry.

Step 6

Step six
Mask off a 7cm strip, as shown, along the edge of the step.

Step 7

Step seven
Apply one coat of Resene Pompeii to the masked strip, as shown and allow three hours to dry.

Step 8

Step eight
Apply a second coat of Resene Pompeii and carefully remove the masking tape. Allow three hours to dry.

Other ideas: For a paler terracotta finish use Resene Non-Skid Deck & Path paint tinted to Resene Footloose.

› Download a PDF of this project

Other projects you might like to try

Checkerboard floor

Checkerboard floor
Weekend DIY

Painted fireplace

Painted fireplace
Weekend DIY

Wooden floors

Wooden floors
Ways with wood

Revamp a deck

Revamp a deck
Ways with wood

Build stackable planter boxes from reclaimed timber, ideal for your herbs

Varnished floor
Ways with wood

Kwila deck repaint

Kwila deck refresh
Ways with wood

View more projects

Order online now:
Testpots | Paints | Primers and Sealers | Stains | Clears | Accessories

Get inspired ! Subscribe Get saving ! Apply for a DIY card

Can't find what you're looking for? Ask us!

Resene Paints (Australia) Limited – www.resene.com

Company profile | Terms | Privacy policy | Quality and environmental policy | Health and safety policy

Trusted Brand New Zealand 2012-2024

Winner - Quality Service Award 2017-2025

Quality Service Award
New Zealand 2017-2025

Welcome to our World of Colour!™
Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online. See measurements/conversions for more details on how electronic colour values are achieved.

What's new | Specifiers | Painters | DIYers | Artists | Kids | Sitemap | Home | TOP ⇧

Winner - Quality Service Award 2017-2025

Quality Service Award NZ 2017-2025