Cracking up - Crackle effect finish
Creating unique broken, antique looking finishes is quick and easy with Resene Crackle, a new crackle effect addition to the Resene range.
Distinctive crackle finishes can be created using a tinted acrylic basecoat (such as Resene Lumbersider), one coat of Resene Crackle and a final coat of an acrylic topcoat tinted to a contrasting colour to the basecoat. Resene Crackle will shrink causing the acrylic topcoat to crack revealing the basecoat colour.
The Crackle effect will vary depending on the application method, enabling many different effects to be achieved with the same product, just by varying application technique and the basecoat and topcoat colour combinations. A thick coat of Resene Crackle will result in fewer larger, deeper cracks, while a thin coat will give smaller, shallower cracks.
Crackle effect finishes are best used on uneven or rough walls, furniture, picture frames, woodwork and small feature areas. As with other effects products, agree a sample panel before the job starts and use this as the standard for the project.
The ideal product when something a little out of the ordinary is called for.
Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online. See measurements/conversions for more details on how electronic colour values are achieved.
|Australia: PO Box 924, Beenleigh, Queensland 4207
Phone: 1800 738 383. Fax: 1800 064 960
Email: firstname.lastname@example.org. Web: www.resene.com.au
|New Zealand: PO Box 38242, Wellington Mail Centre, Lower Hutt 5045
Phone: +64 (4) 577 0500, 0800 RESENE (737 363), Fax: (04) 577 0600
Email: email@example.com. Web: www.resene.co.nz