Resene Engineered Coating Systems

Resene Alumastic
high build epoxy
Resene Alumastic is formulated with a unique blend of low-molecular weight resins, penetrants and surface active agents. This allows excellent wetting and penetration of rusted steel surfaces. Reaction occurs on the surface, setting the components into a high molecular weight, tough durable polymer. Self-priming maintenance coat over steel, rusted steel and galvanised steel.

Typical uses: Galvanised steel, roofing, structural steel.

Resene Aquapoxy
waterborne epoxy - interior
Resene Aquapoxy is a two pack waterborne epoxy polyamino-amide. The cured film is glossy and non-yellowing with high surface hardness and excellent flexibility. It exhibits excellent adhesion and water resistance, and is tolerant of application over damp surfaces. Its excellent solvent resistance makes it very resistant to graffiti. The chemical resistance is similar to conventional solventborne epoxies.

Typical uses: Concrete/plaster, fibre cement, maintenance/repaints, primed steel.

Resene Aquapoxy for Flooring
waterborne epoxy - interior
Resene Aquapoxy is a two pack waterborne epoxy polyamino-amide floor coating. The cured film is glossy and non-yellowing with high surface hardness. It has excellent adhesion and water resistance, and is tolerant of application over damp surfaces. The chemical resistance is similar to conventional solventborne epoxies. Resene Aquapoxy is available modified with Resene SRG Grit to provide a non-skid surface. This is achieved with some sacrifice to cleanability. An excellent compromise consists of one coat of Resene SRG Grit modified Resene Aquapoxy followed by one coat of unmodified Resene Aquapoxy.

Typical uses: Bitumen floors to upgrade solvent resistance, dairy units and piggeries, food processing plants, garage floors, meat works, surfaces that require regular high pressure cleaning, upgrade over sound existing paint for improved protection.

Resene ArmourBond
epoxy sealer
Resene ArmourBond is a low viscosity, penetrative epoxy sealer and porosity equaliser for porous substrates. Reinforces rusted steel surfaces to give a sound base for application of protective coating systems.

Typical uses: Concrete surfaces, fibre cement, rusted steel surfaces, thermal metal spray.

Resene ArmourCat 800
clear sealer - interior
Resene ArmourCat 800 is a two pack, acid-catalysed clear sealer for priming composite boards and timber prior to application of Resene ArmourCat clear finishes.

Typical uses: Desks, doors, furniture, kitchen units, shop fittings, timber fixtures, wall units/shelving.

Resene ArmourCat 805
pigmented sealer/undercoat - interior
Resene ArmourCat 805 is a two pack, tintable acid-catalysed sealer/undercoat for priming composite boards and timbers prior to application of Resene ArmourCat metallic and solid colours. Exhibits quick drying; excellent filling and sanding characteristics.

Typical uses: Desks, doors, furniture, kitchen units, shop fittings, timber fixtures, wall units/shelving.

Resene ArmourCat 810
metallic effects - interior
Resene ArmourCat 810 is a two pack, acid-catalysed finish formulated to produce metallic and special effects. May be overcoated with either Resene ArmourCat or Duragloss clear finishes for enhanced wear and appearance.

Typical uses: Desks, doors, furniture, kitchen units, shop fittings, timber fixtures, wall units/shelving.

Resene ArmourCat 822
satin solid colour - interior
Resene ArmourCat 822 is a two pack, acid-catalysed pigmented satin finish for composite boards and timber.

Typical uses: Desks, doors, furniture, kitchen units, shop fittings, timber fixtures, wall units/shelving.

Resene ArmourCat 823
gloss solid colour - interior
Resene ArmourCat 823 is a two pack, acid-catalysed pigmented gloss finish for composite boards and timber.

Typical uses: Desks, doors, furniture, kitchen units, shop fittings, timber fixtures, wall units/shelving.

Resene ArmourCat 842
satin clear - interior
Resene ArmourCat 842 is a two pack, acid-catalysed satin clear finish for composite boards and timber. Suitable for use as a clear over Resene ArmourCat 810 Metallic Effects for improved durability and cleaning.

Typical uses: Desks, doors, furniture, kitchen units, shop fittings, timber fixtures, wall units/shelving.

Resene ArmourCat 843
gloss clear - interior
Resene ArmourCat 843 is a two pack, acid-catalysed gloss clear finish for composite boards and timber. Suitable for use as a clear over Resene ArmourCat 810 Metallic Effects for improved durability and cleaning.

Typical uses: Desks, doors, furniture, kitchen units, shop fittings, timber fixtures, wall units/shelving.

Resene Armourchlor HB-F
chlorinated rubber high build finish - exterior/interior
Resene Armourchlor HB-F is a single pack high build chlorinated rubber finish coat providing outstanding resistance to corrosion in severe atmospheres, where it may be difficult or uneconomic to employ a two pack coating. These characteristics ensure maintenance free performance during many years' exposure in highly corrosive environments.

Typical uses: Breweries, bridges, chemical plants, galvanised iron, general structural steelwork, marine structures, pulp and paper mills, roofs, ships, tank farms, towers.

Resene Armourchlor HB-P
chlorinated rubber high build primer - exterior/interior
Resene Armourchlor HB-P is a tough durable corrosion inhibiting primer based on zinc phosphate and chlorinated rubber. The coating has a very high degree of impermeability and although blast cleaning must always remain the preferred method of surface preparation it will give superior performance over power or hand cleaned steel.

Typical uses: Bridges, chemical plants, cranes, galvanised iron, general structural steelwork, marine structures, roofs, ships, tank farms, towers.

Resene Armourchlor AM-ZP
chlorinated rubber primer/finish Coat - interior
Resene Armourchlor AM-ZP is a tough, self-priming corrosion inhibiting finish coat based on zinc phosphates and chlorinated rubber for use on suitably prepared interior metal surfaces.

Typical uses: Containers – interiors, general interior structural steelwork.

Resene Armourcote 210
modified alkyd high build primer
Resene Armourcote 210 is a single-pack, high-build inhibitive primer for general industrial and non-immersion marine use. Suitable for overcoating with a wide range of protective and decorative topcoat systems.

Typical uses: Aluminium, galvanised steel, repaints, structural steel.

Resene Armourcote 220
epoxy primer
Resene Armourcote 220 is a polyamide cured inhibitive epoxy primer for general industrial and marine use. May be recoated with a wide range of topcoats to give durable paint systems for immersion and non-immersion services. Excellent aged recoatability with epoxies.

Typical uses: Aluminium, chemical plants, galvanised steel, general marine use, hydro-electric installations, oil rigs/refineries, pulp and paper mills, structural steel, tank farms, waste/water treatment plants.

Resene Armourcote 221
brushing epoxy primer
Resene Armourcote 221 combines the performance properties of a quality inhibitive epoxy primer with the convenience of brush or roller application. Suitable for priming both ferrous and non-ferrous metals that are to be finished with brushing two component polyurethanes, such as Resene Uracryl 400 Series topcoats. primer for new or maintenance work.

Typical uses: Aluminium, galvanised steel, repaints, structural steel, zincalume.

Resene Armourcote 510
high solids epoxy
Resene Armourcote 510 is a high performance, self-priming epoxy mastic combining superb adhesion with true barrier properties. Will tolerate compromised surfaces such as handcleaned steel.

Typical uses: Bridges, chemical plants, concrete surfaces, food processing, plants, power plants, pulp and paper plants, repaints, structural steel, tank exteriors, waste/water treatment plants.

Resene Armourcote 512
epoxy enamel
Resene Armourcote 512 is a high build, gloss epoxy finish that protects concrete and metals against corrosion and chemical degradation. Fully cured film is hard and abrasion resistant.

Typical uses: Concrete surfaces, galvanised steel, general marine use, piping, pulp and paper plants, repaints, structural steel, tank exteriors, waste/water treatment plants.

Resene Armourcote 515 HS
fast dry epoxy
Resene Armourcote 515 HS is a high performance epoxy intermediate/base coat which forms an excellent corrosion barrier. Fast dry characteristics are especially beneficial where early handling of coated items or same day application of multi-coat systems is required. Excellent low temperature cure properties allow use of the product over winter when application of conventional epoxy cure based systems is not possible. Suitable for use in most industrial and marine environments. Formulated for spray application.

Typical uses: Aluminium, concrete, galvanised steel, marine/industrial use, repaints, steel (primed).

Resene Armourcote 608
fast dry spraying enamel - exterior/interior
Resene Armourcote 608 is a high gloss, fast dry spraying enamel based on a modified polyester resin. Durability, colour and gloss retention is typical of high quality gloss enamels.

Typical uses: Most suitably prepared exterior and interior surfaces.

Resene Armourcote 821
waterborne epoxy primer
Resene Armourcote 821 combines the performance properties of a quality inhibitive epoxy primer with the convenience of brush or roller application. Suitable for priming both ferrous and non-ferrous metals that are to be finished with brushing two component solventborne and waterborne polyurethanes, such as Resene Uracryl 400/800 Series topcoats. Primer for new or maintenance work.

Typical uses: Aluminium, galvanised steel, repaints, structural steel, zincalume.

Resene ArmourZinc 110
zinc rich primer single pack
Resene ArmourZinc 110 is a high zinc content primer exhibiting the excellent corrosion resistance of zinc rich primers. Prevents underfilm corrosion at areas of damage.

Typical uses: Primer for steel exposed to a hostile environment, repair or welding primer, shop or field coating of structural steel, plates, tanks and pipelines.

Resene ArmourZinc 120
zinc epoxy primer
Resene ArmourZinc 120 is a tough, abrasion resistant film that bonds strongly to steel, inorganic zinc and existing epoxy surfaces. zinc content of the coating gives steel cathodic protection if the film is damaged. Rapid drying permits early handling of steel when Resene Armourcote 220 is used as a shop primer for new construction projects.

Typical uses: Fertiliser plants, gas plants, hydro-electric installations, marine, oil refineries, petro-chemical plants, power plants, preconstruction or touch-up primer for inorganic zinc, pulp and paper mills, tanklining (when suitably topcoated) for mineral oils, aromatic/aliphatic solvents, vegetable oils.

Resene Armourzinc 125
inorganic hybrid primer
Resene ArmourZinc 125 is a two-pack, inorganic hybrid, zinc rich primer. Base primer for high performance protective coating systems for steel structures in demanding environments. Fast dry-to-recoat increases through-put of multi-coat systems. Unique rheology allows defect-free films to be readily produced. Cures to a dense film with minimal pinholing when overcoated.

Typical uses: General purpose primer for a variety of high performance coating systems to protect steel structures against corrosion.

Resene Graffiti Cleaner
graffiti remover - exterior/interior
Resene Graffiti Cleaner is formulated for effective and easy removal of graffiti from Resene Engineered Coating Systems anti-graffiti coatings. Very effective against common materials used for graffiti, such as spray paint, permanent markers, inks, crayons and lipsticks.

Typical uses: Graffiti removal.

Resene Imperite 413
polyester-urethane gloss - exterior/interior
Resene Imperite 413 is a highly decorative and durable two pack gloss urethane topcoat for the decoration and protection of interior and exterior surfaces. Ideal for use where bright colours and outstanding colour and gloss retention are to be an architectural feature. Excellent resistance to a wide range of chemicals, solvents and salt solutions. Extremely durable topcoat, resists marring and scuffing.

Typical uses: Aluminium, concrete, decorative panels, doors, fascias, fibre cement, furniture, GRP, partitions, repaints, steel joinery, timber, walls.

Resene Imperite I.F. 502
acrylic-epoxy semi-gloss clear - exterior/interior
Resene Imperite I.F. 502 improves the cleanability, abrasion resistance and colour retention of Resene Imperite I.F. 503 Metallic Effects finishes.

Typical uses: Clear semi-gloss topcoat for Resene Imperite Metallics.

Resene Imperite I.F. 503
acrylic-epoxy gloss - exterior/interior
Resene Imperite I.F. 503 is a high performance finish for use when an isocyanate-free topcoat is required. Two-component finish for a wide variety of suitably prepared substrates in all but the most demanding environments. Quick dry properties allow early handling of coated items. Available in solid and metallic pigmented colours.

Typical uses: Aluminium, concrete/plaster, fibre cement, G.R.C. panels, GRP, repaints, structural steel.

Resene Mica Bond
micaceous pigmented alkyd finish - exterior/interior
Resene Mica Bond is an oleoresinous based micaceous iron oxide pigmented coating modified with aluminium to provide lighter colours. Resene Mica Bond is highly resistant to weathering, and mildly corrosive conditions. Its pigmentation confers a very high degree of moisture vapour resistance due to its laminar type structure.

Typical uses: As a topcoat on suitably primed steel such as: Bridges, cranes, gas holders, harbour installation, pipelines, primed aluminium, primed galvanised steel, silos, roofing, transmission towers.

Resene Polymeric AV-8
high build vinyl - exterior/interior
Resene Polymeric AV-8 is a single pack high-build vinyl topcoat providing outstanding resistance to corrosion in severe atmospheres. Contains an acrylic reinforcement to provide superior gloss and colour retention. These characteristics ensure maintenance-free performance over many years exposure in highly corrosive environments.

Typical uses: Bridges, chemical plants, concrete, containers, galvanised iron, general structural steelwork, marine structures, pulp and paper mills, roofs, ships, tank farms, towers.

Resene Rust-Arrest
alkyd anti-corrosive primer
Resene Rust-Arrest is a lead and chromate free primer developed for use on steel where optimum surface preparation is not practical. Resene Rust-Arrest has good surface wetting properties and protects via passivating pigments.

Typical uses: Agricultural equipment, boat and trailer chassis, cast iron, repaints, rusted steel, steel sash windows, wrought iron.

Resene Squash Court Coating
interior
Resene Squash Court Coating is a two pack waterborne epoxy especially developed for coating squash court walls.
Try out colour options on our squash court colouring programme online with just a few clicks.

Typical uses: Concrete/plaster walls.

Resene Steel Fab
chromate free fast dry shop primer
Resene Steel Fab primer is a fast drying, general purpose anti-corrosive primer for use on structural steel.

Typical uses: Specifically designed as a holding primer for use in engineering fabrication shops.

Resene Uracryl 402
urethane-acrylic semi-gloss finish - exterior/interior
Resene Uracryl 402 is a unique high performance two component finish coat with excellent resistance to abrasion, moisture, petroleum solvents and mineral and vegetable oil. The most unusual feature of Resene Uracryl 402 is that, unlike most other classes of high performance coatings, it looks as good as it protects. The sophisticated combination of aliphatic urethanes and urethane reactive acrylic resins gives a system unsurpassed for durability and colour retention.

Typical uses: As a long-life semi-gloss topcoat for use over a wide variety of materials where colour retention is required together with excellent durability and very good chemical resistance. Marine, aluminium, anti-graffiti, bridges, canopies, chemical plants, concrete wall surfaces, dairy factories, fibre cement, food processing plants, furniture, G.R.C. panels, meat works, previously painted surfaces, pulp and paper mills, refineries, roofing, steel doors, balustrades, structural steel, tank farms.

Resene Uracryl 403
urethane-acrylic gloss finish - exterior/interior
Resene Uracryl 403 is a unique high performance two component finish coat with excellent resistance to abrasion, moisture, petroleum solvents and mineral and vegetable oils, alkalis and acids. The most unusual feature of Resene Uracryl 403 is that, unlike most other classes of high performance coatings, it looks as good as it protects. The sophisticated combination of aliphatic urethanes and urethane reactive acrylic resins gives a system unsurpassed for gloss and colour retention.

Typical uses: As a long-life high-gloss topcoat for use over a wide variety of materials where colour retention is required together with excellent durability and very good chemical resistance. Marine, aluminium, anti-graffiti, bridges, canopies, chemical plants, concrete wall surfaces, dairy factories, fibre cement, food processing plants, furniture, G.R.C. panels, meat works, previously painted surfaces, pulp and paper mills, refineries, roofing, steel doors, balustrades, structural steel, tank farms.

Resene Uracryl 404
urethane-acrylic low sheen finish - exterior/interior
Resene Uracryl 404 is a unique high performance two component finish coat with excellent resistance to abrasion, moisture, petroleum solvents and mineral and vegetable oil. The most unusual feature of Resene Uracryl 404 is that, unlike most other classes of high performance coatings, it looks as good as it protects. The sophisticated combination of aliphatic urethanes and urethane reactive acrylic resins gives a system unsurpassed for durability and colour retention.

Typical uses: As a long-life low sheen topcoat for use over a wide variety of materials where colour retention is required together with excellent durability and very good chemical resistance. Aluminium, anti-graffiti, concrete/plaster, fibre cement, galvanised steel, G.R.C. panels, paperfaced plasterboard (Super ToughZone, GIB®, Gyprock®), repaints, structural steel.

Resene Uracryl GraffitiShield
clear anti-graffiti finish - gloss, semi-gloss and flat
Resene Uracryl GraffitiShield is a waterborne two pack clear anti-graffiti coating for a variety of substrates that develops early resistance to tagging with spray paint. Available in gloss, semi-gloss or flat. Graffiti can be cleaned from a substrate protected with Resene Uracryl GraffitiShield using Resene Graffiti Cleaner. Considerably lower in VOCs than traditional solventborne anti-graffiti systems.

Typical uses: Surfaces prone to graffiti attack.

Resene Vinyl Etch
adhesion primer
Resene Vinyl Etch primer combines all the versatility of the normal two pack product with the convenience of a stable single pack. The fast drying time, adhesion, abrasion resistance, and overcoatability features have all been maintained in this highly effective chromate free primer/ pretreatment.

Typical uses: As a pre-treatment, blast primer or holding primer on: Aluminium metal spray, aluminium sheet and extrusions, copper and its alloys, galvanised steel, old varnished surfaces, smooth cementitious surfaces, steel pipes, steel plate, structural steel, zinc metal spray.

Resene Waterborne Uracryl 802
waterborne urethane acrylic semi-gloss finish - exterior/interior
Resene Waterborne Uracryl 802 is a waterborne high performance two component semi-gloss finish with excellent resistance to abrasion, moisture, petroleum solvents and mineral and vegetable oils. The most unusual feature of Resene Waterborne Uracryl 802 is that, unlike other classes of high performance coatings, it looks as good as it protects and is unsurpassed for durability and colour retention.

Typical uses: As a long-life semi-gloss topcoat for use over a wide variety of materials where colour retention is required together with excellent durability and very good chemical resistance. Marine environments, aluminium, anti-graffiti, bridges, canopies, chemical plants, concrete wall surfaces, dairy factories, fibre cement, food processing plants, G.R.C. panels, hotel and motel rooms, meat works, office blocks, pulp and paper mills, roofing, structural steel, galvanising.

Resene Waterborne Uracryl 803
waterborne urethane acrylic gloss finish - exterior/interior
Resene Waterborne Uracryl 803 is a waterborne high performance two component gloss finish with excellent resistance to abrasion, moisture, petroleum solvents and mineral and vegetable oils. The most unusual feature of Resene Waterborne Uracryl 803 is that, unlike other classes of high performance coatings, it looks as good as it protects and is unsurpassed for durability and colour retention.

Typical uses: As a long life gloss topcoat for use over a wide variety of materials where colour retention is required together with excellent durability and very good chemical resistance. Marine environments, aluminum, anti graffiti, chemical plants, concrete wall surfaces, dairy factories, fibre cement, food processing plants, GRC panels, hotel and motel rooms, meat works, office blocks, pulp and paper mills, roofing, structural steel, galvanising.

Resene Zincilate 10
inorganic zinc silicate two pack
Resene Zincilate 10 is a sacrificial two pack priming system for steel, having outstanding anti-corrosive properties. May be applied in conditions up to 95% relative humidity. Eliminates rust undercutting. Excellent resistance to abrasion and impact damage.

Typical uses: As a primer/finish coat, as a permanent primer for organic topcoats such as chlorinated rubbers, epoxies, urethanes or vinyls, pipelines or storage tanks for petro-chemical refining, pulp and paper plants, structural steel, widely used as tanklining for petroleum solvents.

Resene Zincilate 11
inorganic zinc silicate single pack
Resene Zincilate 11 is a sacrificial priming system for steel with superb anti-corrosive properties. May be applied in conditions up to 95% humidity. Eliminates rust undercutting. Excellent resistance to abrasion and impact damage. The performance is equivalent to the more common two pack systems with the following significant benefits: Eliminates mixing procedures on-site and the errors this can cause; Eliminates waste as unused material can be stored for subsequent use; A mechanically agitated pot is no longer necessary; a bottom outlet pot becomes optional.

Typical uses: As a primer/finish coat, as a tanklining for petroleum solvents, structural steel, pipelines or storage tanks for petro-chemical refining, pulp and paper plants, drilling rigs and power stations, as a weld through primer applied at 12 microns – no burn back, as a permanent primer for organic topcoats such as epoxies, vinyls, chlorinated rubbers or urethanes.

Environmentally responsible packaging
Resene metal packaging includes recycled material and is printed using UV inks and varnishes ensuring energy savings and no emissions. Resene paper labels are printed on environmentally responsible paper, which complies with the requirements of environmental management systems EMAS and ISO14001, using vegetable inks.