Feedback
Resene Paints - home page

Garden obelisk


From NZ Gardener magazine

This easy-to-make climbing frame by Rose Hughes adds height, structure and style to your garden and vegetable beds.

How to make a garden obelisk climbing frame

You will need:

  • 6m 100mm x 25mm treated pine
  • 10m flat aluminium bar 20mm x 1.6mm
  • Post top – classic ball
  • 8g x 20mm, 50mm & 80mm screws
  • Drop saw
  • Skill saw and guide
  • Screwdriver / drill bits / countersink bit / metal bit

Cost: $175 excluding paint

1)  Cut the pine into 1500mm lengths. Using the skill saw and the guide (set at 55mm), cut each length into two pieces. On the wider piece, mark 180mm down and 15mm in, and cut the angle. Match the angles on the narrow piece and cut. (images 1 and 2). Repeat to create two matching pairs.

2) Drill and countersink screw holes in the narrower piece and lay onto the wider piece matching edges and top angles. Glue and screw together. Allow to dry. Fill the holes and sand all the edges well. Glue and clamp two sets together at the top angle. Mark and cut a flat base on each leg.

Step 1
Image one

Step 2
Image
two
Step 3
Image three

Step 4
Image four

3) Cut the ball off the post top. Drill a dowel hole in the base and glue into position. Mark out the design with the aluminium bar and cut to length with the metal snips – create four sets of each length. Undercoat the timber surfaces with Resene Quick Dry Primer and one top coat in your chosen colour – I used Submerge. Undercoat the aluminium bars with GP Metal Primer and top coat as above.

4) On each half of the frame, clamp the aluminium bars in place, drill and screw into position using the 20mm screws. Assemble the obelisk, drill and countersink screw holes in the top, and glue and screw together. Fill the screw holes and sand when dry. Add the remaining aluminium bars. Drill a matching dowel hole in the top and glue the ball in place. Add a final topcoat to the whole obelisk.

Photos: Rose Hughes

Download a PDF of this project

Return to more projects

 

Resene Paints Ltd

Resene Paints Ltd   – www.resene.com

We would love to hear from you if you wish to use Resene's images, information and ideas for social medial, blogs, newsletters and other media use. Please email update@resene.co.nz and let us know what you need, what it is for and how Resene will be acknowledged as the source of the content. We are happy to assist with most requests.

Our vision is to be respected as a trusted, ethical and sustainable company and acknowledged as the leading provider of innovative paint and colour technology. View Resene’s profile, Quality Policy, Environmental Policy and Health & Safety Policy.

Any personal data, such as name, address, phone, email details, supplied to Resene for the purposes of receiving newsletters, orders etc will be retained by Resene Paints Ltd and used only by Resene Paints Ltd and its trusted agencies for the purposes of communication/promotion/providing service to you. We do not sell, trade or otherwise transfer your personal data to outside third parties. If you wish to opt out of communication from Resene please complete our contact us form. View our full Privacy Policy.

Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.

View Videos