Textures, weathertight and specialist coatings product range

Resene Aquapel
water repellent clear finish - exterior - waterborne
Environmental Choice approved
Resene Aquapel is a clear water repellent treatment formulated to help control efflorescence and give a long-term water-beading effect to deter water penetration. It may be used on its own or as a primer under waterborne coatings, especially Resene AquaShield mineral effect.

The product is ideal as a clear finish over concrete to maintain the natural appearance while still providing it with some protection against the elements and slowing down the growth of mould, lichen and the like as these organisms will find it more difficult to grow on the coated surface than on an uncoated one.

Typical uses: Most porous building materials. May be used in multiple coats to keep concrete in its natural state looking good for longer by minimising the opportunity for moss, mould and lichen growths, brick, concrete block, fibrous cement, poured concrete, tilt slab, timber.

Resene AquaShield
mineral effect flat finish coating - exterior - waterborne
Resene AquaShield is a high mineral content, super hydrophobic, water repellent coating with excellent coverage for application on porous building materials to impart watershedding properties. It combines the water repellent properties of silicones with a special surface micro-structure, which considerably reduces the contact area for water and dirt. The result: dirt particles adhere lightly and are more easily carried away by rain. Ideal for highly stressed weather-exposed facades. Made to the original Deutsches Patentschrift 1284007.

Although it has excellent weather resistance, as with most waterborne finishes it allows the building to 'breathe' so that water vapours from inside are able to pass through the paint film to the exterior.

Resene AquaShield is an attractive flat mineral effect finish, a classic aged look, particularly suited to heritage, art deco, Sante Fe and Mediterranean style homes and buildings.

When used commercially it is best applied to heritage buildings that suit the soft, slightly textured finish. Use Resene Lumbersider or Resene Sonyx 101 for foundations or other high wear areas.

Porous substrates should be pre-treated with Resene Aquapel to maximise water repellency and breathability properties. Resene AquaShield can be used in conjunction with other primers and sealers, but water repellency and breathability properties will be impaired.

Typical uses: Brick, concrete block, fibrous cement, natural stone, poured concrete, stucco, tilt slab.

Resene AquaShield CoolColour™
mineral effect flat finish coating - exterior - waterborne
Resene AquaShield is a high mineral content super-hydrophobic, water repellent coating for application on most porous building materials to impart watershedding properties. Combines the water repellent properties of silicones with a special surface microstructure considerably reducing the contact area for water and dirt. The result: dirt particles adhere loosely and are more easily carried away by raindrops, leaving a dry and attractive facade. Ideal for highly stressed weather-exposed facades. Made to the original Deutsches Patentschrift 1284007. Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-up.

Typical uses: Brick, concrete block, fibrous cement, natural stone, poured concrete, stucco, tilt slab.

Resene Masonry Flat
flat/matt masonry coating - exterior/interior - waterborne
Environmental Choice approved
Resene Masonry Flat is a premium quality, self-priming exterior waterborne coating designed for direct application to porous masonry surfaces. It imparts a unique and even matt side sheen finish with very low light reflectively, which helps provide a uniform surface appearance on substrates such as cement render, brick and concrete block. Available in Australia only.

Typical uses: Block and brickwork, concrete, fibre cement, G.R.C. panels, monolithic building systems, solid plaster.

Resene Resitex - Standard, Medium, Coarse
satin texture coating - exterior/interior - waterborne
Environmental Choice approved
Resene Resitex is a tough waterborne textured spray finish with excellent adhesion and flexibility, available in three grades Resene Resitex Coarse - 880 micron deeply textured rugged texture, Resene Resitex Medium - 500 micron heavy Mediterranean texture and Resene Resitex Standard - 300 micron light Mediterranean texture. These textures effectively disguise the imperfections and surface blemishes of a substrate without detracting from the architectural concept.

Typical uses: Block and brickwork, concrete, fibre cement, G.R.C. panels, monolithic building systems, primed galvanised steel, solid plaster, suitably primed wallboards.

Resene Resitex Plastercote
elastomeric specialist finish - exterior/interior - waterborne
Environmental Choice approved
Resene Resitex Plastercote is an elastomeric acrylic specialist finish perfect for creating a Mediterranean style effect, yet tough enough to withstand the harsh environment. Based on tough acrylic elastomers that have an excellent 'memory' of their original shape when distorted. Improved dirt pick-up resistance and crack bridging properties are also of significant benefit. Ideally suited for structures that will flex and develop minor cracks. Protects flexing structures from concrete carbonisation by maintaining a seal over the cracks that develop.

Resene Resitex Plastercote may be applied to reproduce a sponge plaster finish associated with Mediterranean architecture through to a scratch plaster finish (worm tracks) depending on application technique (spray or trowel), aggregate size and spreading rate.

Typical uses: Block and brickwork, concrete, fibre cement, G.R.C. panels, monolithic building systems, primed galvanised steel, solid plaster, suitably primed wallboards.

Resene Sandtex
specialist finish flat/matt Mediterranean effect coating - exterior/interior - waterborne
Environmental Choice approved
Resene Sandtex is a tough waterborne textured spray finish for beautifying and protecting concrete structures. It has a fine texture of 150 microns and is often used recreate the texture of natural sandstone. Inherently durable, it may also be used to create lightly textured effects is ideal for use when disguising minor surface imperfections.

The time-worn strength of sandstone with the mellow patina of age has been recreated in Resene Sandtex. Perfect for beautifying and protecting concrete, this very versatile finish can be used to reproduce a variety of finishes from aged render effects through to natural limestone and sandstone finishes. The fine sandstone texture adds an extra dimension to the coating and effectively disguises minor surface blemishes without changing the basic architectural concept. The combination of strong colour and texture can transform an ordinary surface into an architectural feature, making it a very popular choice for feature walls.

Resene Sandtex may be applied by roller, spray or brush. A popular brush application method is to crows foot the coating, applying it by wide brush in a criss cross pattern to give a tactile brushed Mediterranean look.

Use Resene Sandtex with a basecoat of Resene Lumbersider tinted to the Resene Sandtex topcoat colour to ensure uniformity of the finish. Some applicators may find it easier to apply a fine coat of Resene Sandtex so that the subsequent coat of Resene Sandtex will have something to grip onto. An excellent basecoat for Paint Effects Medium as the texture adds an extra dimension to the effect. Resene Sandtex also provides an ideal basecoat for creating Mediterranean style effects. The texture in Resene Sandtex adds an extra dimension to the paint effect. Its effect is not dissimilar to traditional limewashes or cement based paints.

Typical uses: Block and brickwork, concrete, fibre cement, G.R.C. panels, monolithic building systems, primed galvanised steel, solid plaster, wallboards.

Resene Swimming Pool Paint
concrete pool paint – exterior - solventborne
Resene Swimming Pool Paint is formulated for direct application to suitably prepared concrete swimming pools or to maintain pools coated in a compatible coating system. A single pack product that provides a tough and durable coloured pool finish. Excellent intercoat adhesion ensures easy maintenance and touch-up. Excellent intercoat adhesion ensures Resene Swimming Pool Paint is easy to maintain as repainting does not require time consuming preparation methods. The product can be applied over a wide range of temperatures provided the concrete surface is dry.

For the DIY'er Resene Swimming Pool Paint is best applied by roller (brushing is suitable for small areas only). Spray application requires a qualified tradesperson.

Typical uses: Concrete swimming pools.

Resene Water Lockout
watertight membrane
Environmental Choice approved
Resene Water Lockout is a versatile high build liquid watertight membrane based on a urethane modified bitumen emulsion. It cures to a seamless highly elastic and durable film that adheres well to most substrates to block water ingress.

Typical uses: masonry – walls, in situ concrete - walls/floors, plastered/rendered walls, retaining walls, wood planter box interiors

Resene X-200
acrylic weathertight membrane coating - exterior/interior - waterborne
Environmental Choice approved
Looking for a resilient exterior coating that is highly water resistant, possesses excellent adhesion and stretch characteristics and looks as good as it performs?

Then choose Resene X-200 and enjoy a quality of finish that buildings all over the country have been enjoying for years. Resene X-200 uniquely combines low viscosity with high build ensuring excellent penetration into cracks and pores, superb adhesion and durability. It develops into a tough, durable and continuous membrane, while its fibre reinforcement increases tensile strength. Resene X-200 is a popular choice for refurbishments in areas prone to earthquakes and for concrete buildings nationwide.

It may be used on its own or under Resene textures such as Resene Resitex or Resene Sandtex. It is perfect on concrete, blockwork, fibre cement sheeting and solid plaster, where weathertightness is required. Resene X-200 may be brushed into small cracks (less than 1mm) to prevent moisture entering the damaged substrate. For cracks 1-2mm use Resene Brushable Crack Filler or a suitable sealant.

Resene X-200 has a low sheen, slightly textured finish, in keeping with current trends for lower gloss finishes. It is easily applied and has excellent durability.

Typical uses: Concrete blocks, concrete surfaces, fibre reinforced cement.

Resene X-200 CoolColour
acrylic weathertight membrane coating - exterior/interior - waterborne
Environmental Choice approved
Looking for a resilient exterior coating that is highly water resistant, possesses excellent adhesion and stretch characteristics and looks as good as it performs?

Then choose Resene X-200 and enjoy a quality of finish that buildings all over the country have been enjoying for years. Resene X-200 uniquely combines low viscosity with high build ensuring excellent penetration into cracks and pores, superb adhesion and durability. It develops into a tough, durable and continuous membrane, while its fibre reinforcement increases tensile strength. Resene X-200 is a popular choice for refurbishments in areas prone to earthquakes and for concrete buildings nationwide.

It may be used on its own or under Resene textures such as Resene Resitex or Resene Sandtex. It is perfect on concrete, blockwork, fibre cement sheeting and solid plaster, where weathertightness is required. Resene X-200 may be brushed into small cracks (less than 1mm) to prevent moisture entering the damaged substrate. For cracks 1-2mm use Resene Brushable Crack Filler or a suitable sealant.

Resene X-200 has a low sheen, slightly textured finish, in keeping with current trends for lower gloss finishes. It is easily applied and has excellent durability.

Selected colours available in Resene CoolColour technology to reflect more heat than the standard versions of the colour. Resene CoolColours perform optimally on dark colours that are the most prone to heat build-up.

Typical uses: Concrete blocks, concrete surfaces, fibre reinforced cement.

Resene X-300E
high build elastomeric membrane coating - exterior/interior - waterborne
Environmental Choice approved
Resene X-300E is a thixotropic weathertight membrane designed for thick application over cracked concrete surfaces. Thixotropic means it is a coating material that, while free-flowing and easy to manipulate under the brush, sets to a gel within a short time when it is allowed to remain at rest. It is made using acrylic elastomers that have excellent 'memory' of their original shape when distorted, which gives the product incredible movement and crack bridging capabilities, enabling it to bridge gaps up to half the thickness of the paint film. Resene X-300E performs well over badly cracked and deteriorating substrates and is therefore recommended over propagating cracks - that is, when cracks are getting worse and/or new ones are appearing. This product will resolve many less than perfect substrates, but is not recommended on very poor substrates. It is able to be applied at very high thicknesses without sagging or film cracking.

Resene X-300E has a semi-gloss finish but like all elastomeric coatings is more prone to dirt pickup than standard coatings. This may be easily overcome with a final coat of a standard waterborne topcoat such as Resene Lumbersider or Resene X-200 weathertight membrane.

Typical uses: Concrete road bridges, high rise concrete buildings, all other cementitious surfaces.

Resene X-400
ultra high build barrier membrane coating - exterior/interior - waterborne
Environmental Choice approved
Resene X-400 is a semi-gloss waterborne weathertight membrane, with superior small void and crack filling properties, designed for thick application over concrete surfaces. It may be applied at very high thicknesses without sagging or film cracking. Resene X-400 may be applied with a goop loop roller to achieve a high textured finish, with a standard roller for a less textured finish or by spray. With Resene X-400 you get the dual benefits of texture and weathertightness in one product combined with better washability and reduced dirt pickup compared to elastomeric coatings. Shows similar characteristics to the industry yardstick Resene X-200 in terms of adhesion, ease of application and durability. Replaces Resene Thixalon 5.

Typical uses: All cementitious surfaces, concrete, blockwork, fibre cement sheeting, solid plaster and on cracked substrates where weathertightness is required. Brushed into small cracks it will prevent moisture entering the damaged substrate.