Resene special purpose product range

Resene Art Action Art & Poster Paint

Eco Choice approved

Resene Art Action Art & Poster Paint is a permanent, durable acrylic paint designed specifically for general use in home, classroom and business artwork. Suitable for use by both children and adults. If a higher quality paint is required, use Resene Art Action Student Acrylic. Resene Art Action Tempera is recommended for younger children.

Resene Art Action Clear – gloss, satin, flat

Eco Choice approved

Resene Art Action Clear is a waterborne clear designed to provide a protective layer over your artwork, or use direct over concrete for a natural look. Available in gloss, satin and flat.

Resene Art Action Student Acrylic

Eco Choice approved

Resene Art Action Student Acrylic is a high quality, permanent, durable acrylic paint designed for home, classroom and business artwork. Suitable for use by both children and adults. Resene Art Action Tempera is recommended for younger children.

Resene Art Action Tempera

Eco Choice approved

Resene Art Action Tempera is designed specifically for use on home or classroom artwork. Ideal for younger children (3 years or older). A good value option for non-permanent artwork, posters and pictures that will be protected from moisture. If a higher quality, more permanent paint is required, use Resene Art Action Student Acrylic.

Resene Brushing Additive

Resene Brushing Additive is specially formulated for addition to Resene waterborne enamel paints to reduce brush marking and produce a smoother finish on trim and joinery. Warm, dry conditions and hot surfaces result in too rapid drying of waterborne paints. This may lead to excessive foaming on application and generally poor application properties such as short wet edge times and impaired levelling. Resene Brushing Additive additions of 2%-5% will generally improve most application problems caused by too rapid drying. In more severe cases more Resene Brushing Additive is beneficial. Do not use more than 5% (200ml per 4 litres). Do not use with Resene Hot Weather Additive.

Typical uses:

• In Resene Lustacryl and Resene Enamacryl when brush applied onto trim and joinery.

Resene FX Crackle

crackle effects finish
interior

Creating unique broken, antique looking finishes is quick and easy with Resene FX Crackle. Distinctive crackle finishes can be created using a tinted acrylic basecoat (such as Resene Lumbersider), one coat of Resene FX Crackle and a final coat of an acrylic topcoat tinted to a contrasting colour to the basecoat. Resene FX Crackle will shrink causing the acrylic topcoat to crack revealing the basecoat colour. The Crackle effect will vary depending on the application method, enabling many different effects to be achieved with the same product, just by varying application technique and the basecoat and topcoat colour combinations. A thick coat of Resene FX Crackle will result in fewer larger, deeper cracks, while a thin coat will give smaller, shallower cracks. Crackle effect finishes are best used on uneven or rough walls, furniture, picture frames, woodwork and small feature areas. As with other effects products, agree a sample panel before the job starts and use this as the standard for the project.

If you wish to overcoat a Resene FX Crackle finish with an acrylic paint you will need to apply Resene Sureseal to seal off the crackle layer before topcoating. Depending upon the depth of the crackle finish you may still see a pattern through the repainted area.

Typical uses:

• Small areas where a crackle effect finish is required. Not recommended for large areas as it is difficult to get an even finish on a larger area.

Resene FX Magnetic Magic

magnetic effect finish
interior - waterborne

Resene FX Magnetic Magic is a premium waterborne paint formulated with iron oxides for maximum magnetic effect. Overcoat with your choice of Resene topcoats in over 3000 Resene colours. Magnets can be hung directly onto the finished area once dry and cured. To hang a poster, picture or photo from your magnetic area, use self-adhesive magnetic strips applied to the back of the item. The weight of the item will determine the number and placement of the magnets. For maximum magnetic strength use high quality magnets.

Typical uses:

• Smooth, non-textured interior areas where it is desired to affix magnets.

Resene Master Painters Stainers (also known as Resene MPS Stainers)

Resene Master Painters Stainers are multi-purpose no added VOC colourants that have been tested for use in all Resene decorative undercoats and topcoats. This enables colours to be tinted without adding unwanted VOCs. Primarily used by professional painters to add a touch of colour to white products.

Resene Quick2Clean Paint Equipment

Resene Quick2Clean Paint Equipment is designed to make cleaning spray equipment quick and easy to help you maintain and maximise the life of your spray gear. It is also suitable as a conditioner for brushes used with waterborne paints to help you care for your brushes.

Typical uses:

• Designed for spray equipment and as a brush conditioner for waterborne paints.

Resene Summit Roof Commercial Brushing Additive

exterior

Resene Summit Roof Commercial Brushing Additive must be used with Resene Summit Roof Commercial Spray Satin on small areas when applied by brush before the roof is sprayed. Add 30ml of Resene Summit Roof Commercial Brushing Additive per litre of Resene Summit Roof Commercial Spray Satin. The additive adds ‘bulk’ to Resene Summit Roof Commercial. Resene Summit Roof Commercial has been developed without compromise for airless spraying. This has meant how well it brushes or rolls has been compromised. The additive effectively adds the ‘brushing ingredients’ back to the paint. If you need to brush small areas, decant the amount of paint needed into a separate can and add the Resene Summit Roof Commercial Brushing Additive and use.

Resene Summit Roof Spray Additive

Resene Summit Roof Spray Additive is specially formulated to extend open time, improve flow and levelling, and to achieve an integrated paint film when Resene Summit Roof paint is airless spray applied to an existing dark roof paint colour or when the surface is too hot to touch.

Resene TagCover

quick and easy graffiti cover paint
exterior/interior - waterborne

Eco Choice approved

Resene TagCover is a custom made range of waterborne satin paints formulated to provide a budget friendly paint system to cover graffiti. Available in a standard colour range in 10L pails. Other sizes and colours available on request. Minimum quantities may apply.

Typical uses:

• Concrete, plaster, timber.

Resene Umbrella Additive

Resene Umbrella Additive is an additive for exterior waterborne coatings providing rapid protection from showers and light rain even before the coating has dried. Once applied, a coating containing Resene Umbrella Additive quickly starts to build a protective shell that then extends throughout the whole coating. Water is able to evaporate from the coating allowing it to dry but showers and light rain simply roll off leaving the still-drying coating firmly attached to the substrate. The Umbrella Effect will work in light showers only. Exterior painting should not be undertaken when medium or heavy rain is expected during the paint’s drying phase.

Resene Wintergrade Additive

Resene Wintergrade Additive is an additive for exterior waterborne coatings providing extra protection against paint application in colder temperatures, so you can apply treated paint in temperatures down to 3?C.

Cold conditions can cause standard waterborne paint films to crack or powder and lead to premature paint failure. When using paint over winter, keep an eye on the temperature, both on the surface and in the air. Remember a surface can be a lot colder than the air that surrounds it so you may find it’s best to change your order of work and work on surfaces like plasterboard in the early morning and move to areas like concrete, which tend to be cooler in cold weather until they have had a chance to warm up a little.

Bug Juice™

Bug Juice™ is an insecticide paint additive designed to eliminate crawling and flying insects on interior and exterior surfaces. It is a contact pesticide and it begins to work after an insect makes contact with the treated surface.

Resene Fly Deterrent

Resene Fly Deterrent reduces the appearance of fly spots by discouraging flies from landing on painted surfaces.

Resene MoulDefender

Resene MoulDefender is a fungicidal additive designed to be added to waterborne paint at the point of sale when a particular need for extra protection against mould is identified. Suitable for use inside and out and ideal for wet areas such as kitchens, bathrooms and laundries, Resene MoulDefender will slow down the reappearance of mould. Essentially Resene MoulDefender acts as a mould protection booster shot in your paint.

Resene Decorator Acrylic EasySand

interior – waterborne

Eco Choice approved – trade only

Resene Decorator Acrylic EasySand is a water reducible first coat for plasterboard walls and air-dry stoppings designed to minimise porosity and textural differences. Easily sanded.

Typical uses:

• Air dry (polymer based) stoppings and finishing compounds, paperfaced plasterboard.

Resene Decorator Acrylic Primer Undercoat

exterior/interior – waterborne

Eco Choice approved – trade only

Resene Decorator Acrylic Primer Undercoat provides long term flexibility over unstable substrates coupled with exceptional durability even when left uncoated for prolonged periods. Dries in only 20 minutes and can be recoated in two hours. May be topcoated with waterborne or solventborne systems.

Typical uses:

• Block and brickwork, cement plaster, cloth/woven wallcoverings, composite and fibre board, repaints, timber, wallboards, wallpaper.

Resene Decorator Acrylic Sealer Undercoat

interior – waterborne

Eco Choice approved – trade only

Resene Decorator Acrylic Sealer Undercoat is a water reducible first coat for plasterboard walls and air-dry stoppings designed to minimise porosity and textural differences. Excellent holdout of topcoats. Very good opacity.

Typical uses:

• Air dry (polymer based) stoppings and finishing compounds, paperfaced plasterboard.

Resene Decorator First2Finish

interior - waterborne
trade only

Resene Decorator First2Finish is a waterborne finish designed to save you time and money and is ideally suited to group housing type projects. It dries to a very smooth even finish, but can also be back rolled if a slight texture is required (to disguise surface imperfections etc). Once proficient in its use it's expected a professional painter could shave 10% off the time needed to finish a new home interior.

Typical uses:

• On plasterboard, MDF and pine skirting boards, door and window frames.

Recommended process for new work:

1. Mask windows, light fittings etc, remove or mask doors.
2. Spray Resene Decorator First2Finish onto skirting boards, door and window frames, plasterboard walls and ceilings, @ approx.120-150 microns.
3. De-nib ceilings if needed.
4. Spray topcoat to ceilings.
5. De-nib walls, frames, skirting boards etc.
6. Spray Resene Lustacryl (Commercial or Standard) to skirtings and frames.
7. Brush and roll topcoats to walls (Resene Zylone Sheen, Resene SpaceCote, Resene Decorator wall paints).

Resene Decorator First2Finish is not designed to be easy to sand. De-nib within 24 hours only. No other sanding should be needed. De-nibbing is running the sandpaper once or twice over the surface to remove any small bumps.

Recommended spray set-up: Use a 516 FFLP tip, which achieves a finer atomisation than the 517 LP tip, which could also be used but will result in more product being applied per square metre. Run the Graco 495 between 2000 and 2200 psi (pressure setting).

Resene Decorator High Cover Acrylic Wallboard Sealer

interior – waterborne

Eco Choice approved – trade only

Resene Decorator High Cover Acrylic Wallboard Sealer is a water reducible first coat for plasterboard walls and air-dry stoppings designed to minimise porosity and textural differences. Excellent coverage with good sanding abilities.

Typical uses:

• Air dry (polymer based) stoppings and finishing compounds, paperfaced plasterboard.

Resene Decorator Alkyd Undercoat

exterior/interior - solventborne
trade only

Resene Decorator Alkyd Undercoat All Purpose is a blend of special alkyd resins balanced with unique pigments, making it an easy brushing hard drying undercoat with exceptional sanding properties. Designed with a low sheen that allows exceptional enamel holdout. Suitable for overcoating by most Resene finishing systems.

Typical uses:

• Bathrooms, fibre and particle board, furniture, kitchens, laundries, paperfaced plasterboard, suitably primed metals, timber – architraves, doors, skirtings, window frames, wallboards, weatherboards, all exterior and interior prepared surfaces.

Resene Decorator Acrylic Ceiling Flat

interior – waterborne

Eco Choice approved – trade only

Resene Decorator Ceiling Flat is recommended for use on ceilings of living rooms, bedrooms, and dining rooms where a flat finish is required. Flow and build properties mean that one coat is often enough to achieve complete hiding. For use in dry areas.

Typical uses:

• Ceilings, fibrous plaster, paperfaced plasterboard, plaster glass, repaints.

Resene Decorator Acrylic IE Flat

exterior/interior – waterborne

Eco Choice approved – trade only

Resene Decorator Acrylic IE Flat is a well proven blend of resins and pigments that combined produces a very flat film. Its ease of application makes it an excellent choice for decorating.

Typical uses:

• Interior – Fibre and particle board, fibrous plaster, paperfaced plasterboard, wallboards, Wallpaper; Exterior – Blockwork, brickwork, cement plaster, concrete, fibre cement, roughcast/stucco.

Resene Decorator Acrylic Low Sheen

exterior/interior – waterborne

Eco Choice approved – trade only

Resene Decorator Acrylic Low Sheen is based on a tough 100% acrylic resin to ensure maximum durability in all exposed conditions. Drying to an attractive low sheen finish, its ease of application, washability and durability make it an ideal choice for both interior and exterior use.

Typical uses:

• Interior – Beams, fibre and particle board, wallboards, wallpaper; Exterior – Blockwork, brickwork, concrete and plaster, fibre cement, primed galvanised steel, repaints, timber.

Resene Decorator Acrylic Semi-Gloss

exterior/interior – waterborne

Eco Choice approved – trade only

Resene Decorator Acrylic Semi-Gloss is a combination of top quality acrylic emulsions blended with high grade pigment dispersions. Has a proven record of exposure on concrete buildings.

Typical uses:

• Blockwork, brickwork, cement plaster, concrete, fibre cement, roughcast/stucco.

Resene Decorator Interior Ultra Low Sheen

interior – waterborne

Eco Choice approved – trade only

Resene Decorator Interior Ultra Low Sheen is based on a tough 100% acrylic resin to ensure maximum durability in all exposed conditions. Drying to an attractive ultra low sheen finish, its ease of application, washability and durability make it an ideal choice for interior use.

Typical uses:

• Beams, fibre and particle board, wallboards, wallpaper.

Resene Decorator Hi-Opacity Ceiling Flat

interior – waterborne

Eco Choice approved – trade only

Resene Decorator Hi-Opacity Ceiling Flat recommended for use on ceilings of living rooms, bedrooms, and dining rooms where a flat finish is required. Flow and build properties mean that one coat is often enough to achieve complete hiding. Hi-opacity, clean white. For use in dry areas.

Typical uses:

• Ceilings, fibrous plaster, paperfaced plasterboard, plaster glass, repaints.

Resene Decorator Hi-Op EasyTouch Dead Flat Ceiling Paint

interior – waterborne

Eco Choice approved – trade only

Resene Decorator Hi-Op EasyTouch Dead Flat Ceiling Paint is recommended for use on ceilings of living rooms, bedrooms, and dining rooms where a flat finish is required. Flow and build properties mean that one coat is often enough to achieve complete hiding. For use in dry areas. Easy to touch up if required.

Typical uses:

• Ceilings, fibrous plaster, paperfaced plasterboard, plaster glass, repaints.

Resene Decorator Interior Low Sheen

interior – waterborne

Eco Choice approved – trade only

Resene Decorator Acrylic Low Sheen is based on a 100% acrylic low odour resin and has been formulated specifically for easy application. This results in an attractive and washable low sheen finish ideal for the majority of interior surfaces.

Typical uses:

• Beams, fibre and particle board, wallboards, wallpaper.

Resene Decorator Alkyd Flat

interior – solventborne
trade only

Resene Decorator Alkyd Flat is a flat enamel finish for use on suitably primed and sealed interior surfaces. Matches full gloss enamel in surface toughness, steam and scrub resistance.

Typical uses:

• Bedrooms, ceilings, composite board, fibrous plaster, hallways, hardboard, lounges, paperfaced plasterboard, walls.